Place the throw line 8 ft (approximately 2.43 m) from the face of the dartboard. Choose a location with at least 10 ft (3 m) of clear space in front of the board.
Locate suitable wall studs, use the supplied wall template and secure the cabinet with the four lag screws provided. The manual recommends that two people complete the installation for safer alignment and handling.
This model uses a DC 6V 450mA adapter. Use the supplied adapter, keep the cable clear of the playing area, and disconnect it from the board and power outlet after use.
Switch on the board, press GAME to choose G01-G25, press OPTION for the selected game's settings, choose the number of players with PLAYER, then press START/NEXT. For G01 X01 games, use DOUBLE if you want a Double In, Double Out or Master Out rule.
A single scores the number shown, a double scores twice that number, and a triple scores three times that number. The inner bullseye scores 50 points. The outer bullseye scores 25 or 50 points, depending on the selected setting.
DI means Double In, DO means Double Out, and MO means Master Out. Double In requires a double to begin scoring. Double Out requires the finishing dart to be a double. Master Out allows the finishing dart to be a double or triple. The board also supports combined DI+DO and DI+MO modes.
Confirm that the supplied adapter is firmly connected to the dartboard and a working power outlet, then check the ON/OFF switch on the lower-right side of the cabinet. If the board still does not power on, contact Yirinatek support.
Email yirinatek@gmail.com or call +1 8165534389. Please include your product model, order information and a clear description of the issue so the team can assist you efficiently.
Choosing a selection results in a full page refresh.
